Long Life RF433 Interconnected Carbon Monoxide Detector

Professional Interconnected Carbon Monoxide Detector with Display and Siren

The RF433 Long Life Interconnected Carbon Monoxide Detector represents an advanced security solution

for residential and commercial environments . Designed with the latest generation electrochemical sensing technology, this

device constantly monitors air quality and detects the presence of carbon monoxide (CO), an invisible gas,

odorless and highly toxic. The alarm goes off when dangerous thresholds are exceeded, immediately warning

with acoustic and visual signal . One of its distinctive features is the wireless interconnection via frequency

RF433 MHz, which allows you to connect up to 30 devices . Battery power makes the device independent from

electrical network, simple to install in any context and ideal for houses , apartments, hotels , garages, campers and technical rooms.

Professional electrochemical sensor

The heart of the device is a latest-generation electrochemical sensor , designed to ensure high stability,

detection accuracy and low sensitivity drift over time. Compliant with EN50291-1:2018,

It is able to detect even small quantities of carbon monoxide , effectively protecting

the home or commercial environment from one of the most dangerous and invisible gases.

RF433 MHz Interconnect Technology

Equipped with a 433 MHz radio module, the Detector can be interconnected with up to 30 compatible devices, such as detectors

of smoke, gas or other CO alarms of the same protocol. Thanks to the "One-Go-All-Go" system, if a sensor detects an anomaly,

all the others go off simultaneously , allowing you to immediately alert even the most distant areas of the house or

of the building. A particularly useful function in multi-storey houses , accommodation facilities or commercial environments with multiple rooms.

NB : Only the "interconnected" RF433 MHz models in our catalogue can communicate with each other.

Highly readable LCD display with clear indications

The detector is equipped with a large backlit LCD display that shows the concentration of carbon monoxide in real time.

of carbon in the air, expressed in PPM (parts per million). It also provides useful information on the status of the device,

the battery and any error messages, thus ensuring constant and visual control even from a distance.

Loud audible alarm and LED visual signals

If CO is detected, the device activates a loud audible alarm , above 85 dB , which can be easily

heard even in noisy environments or at night. The alarm is accompanied by a flashing red LED light ,

while a green LED indicates normal operation and a yellow LED indicates any faults or anomalies.

Sensor life: 10 years

The sensor has a certified operating life of 10 years , offering a long period of continuous protection.

At the end of its useful life, the detector emits a specific acoustic and visual signal ,

indicating the need to replace it to maintain the highest level of safety .

Easy installation and battery powered

It works with 2 AA LR6 batteries that guarantee up to 3 years of autonomy. Installation is quick , on the wall or ceiling,

with accessories included in the package. Also ideal for environments where there is no electricity supply.

Automatic and manual self-test function

The device performs an automatic self-diagnosis every minute to verify the correct functioning of the sensor

and internal circuits. In addition, it is possible to perform manual testing with a simple touch on the “ TEST ” button,

useful for periodic checks and to temporarily silence the alarm in case of non-critical activations.

Ideal for:

• Houses, apartments, boiler rooms.
• Garages and enclosed spaces with motor vehicles.
• Hotels, vacation homes, Airbnb, accommodation facilities.
• Campers, caravans, boats with gas systems.
• Technical rooms, shops, small warehouses.

Why buy this Interconnected Carbon Monoxide Detector?

• Professional long-life electrochemical sensor.
• RF433 technology for wireless interconnection.
• LCD display with real-time detection.
• Loud audible alarm and visual signaling.
• Battery operated wireless design for easy installation.
• Complies with European safety standards (EN50291).
• Simplified detector test.
• Suitable for any type of environment.