• Reduced price

Buy it with

  • Tuya RF433 Wireless Signal Repeater with Adapter
  • +
  • Tuya Wireless Dual PIR Motion Detector Solar Panel and Pet Immunity
  • +
  • Tuya Remote Control for Wireless Alarm Panels
  • Total price: €105.79

Tuya RF433 Wireless Signal Repeater with Adapter

Tuya-WSR201

Extends RF433 wireless signals

€29.90
€26.90 Save €3.00
Tax included
rating Read the review
Average rating: 5/5 Number of reviews: 1
Delivery in 24/48 hours
Quantity

Close
Description

Tuya Wide Range 433Mhz Signal Amplifier for Wireless Devices

The RF433 Wireless Signal Repeater is a device designed to amplify and improve coverage

of the RF433 signal. This type of signal is commonly used in safety devices such as

alarm sensors, wireless remote controls, home automation systems, and other operating devices

on 433 MHz radio frequencies. With its advanced technology, our repeater extends coverage

of the signal , eliminating dead zones and ensuring a rapid response to alarms. can avoid interference

during transmission and ensure reliable signal transmission.

Indispensable for Alarms

If you have an alarm system that uses RF433 sensors, the repeater can be used to extend

signal coverage. This device is designed to extend signal coverage,

ensuring reliable communication between the sensors and the alarm control unit .

The repeater can work with a group of sensors or with all of them at the same time.

Up to 100 radio sensors can be stored in its memory.

How to register sensors in the signal repeater

First, connect the power and press the sensor recording button for 3 seconds and at the same

time the sensor recording status LED will flash, activating the sensors you want to record.

Afterwards, the sensor recording LED will turn off.

How to verify that sensors have been registered

To check them it is possible to connect the registered sensors , when connected they will turn on

the transmission LED indicating that they have been connected correctly.

How to delete already registered sensors

Press and hold the Record button until the status LED flashes and goes off.

How to install 433Mhz signal amplifier for alarm detectors?

The signal amplifier works by receiving the signal from the detectors and repeating it .

In this way it is necessary to install the 433Mhz repeater in an intermediate place between the detectors and the area to which

you want to send the signal. The load capacity may vary depending on the number of walls and thickness,

and can reach up to 100-200 meters in open spaces and 40-50 meters with walls.

Note
  • If the sensors do not have any coding, they will not work directly with the repeater.
  • The transmission time is usually between 3 and 10 seconds. Longer times can damage the drive module.
Situations where a RF433 Wireless Signal Repeater can be useful
  • Alarm Signal Amplification : If you have an alarm system that uses RF433 sensors.
  • Wireless Remote Controls : If you use wireless remote controls for devices such as automatic gates , lights or garage doors, the repeater can improve the signal range.
  • Home Automation Systems : If you have home automation devices such as thermostats, smart lights or smart plugs that use RF433 technology.
  • Monitoring Systems : If you use wireless monitoring systems, such as temperature or humidity sensors to monitor specific environments.
  • Security Devices: In addition to alarms, other security devices such as wireless surveillance cameras, motion sensors or sirens .

Product Details
Tuya-WSR201

Data sheet

Alimentazione
12V DC
Working temperature
from -10°C to +50°C
Working humidity
5% - 95% non-condensing
Mobile application
Tuya Smart or Smart Life
Dimensions
105x90x35 mm
Item weight
290g
Communication Protocol
RF 433MHz
Wireless transmission range
Up to 200 meters in open space
Radio frequency
RF433MHz
Memory
100 radio codes
Resistance to oscillations
1.5M-4.7M
Reception time
3 s (signal not transmitted during reception)
Coding IC
2262, 2264, 2260, 1527, 2240
Transmission time
3-10 seconds (not received during signal transmission)
All product reviews comply with DIRECTIVE (EU) 2019/2161
malheureusement pas compatible avec sonnette vide
rating
5
ras
You might also like
Viewed products
8 autres produits dans la même catégorie :