Home

telecamere smart wifi
welock
Tuya Smart WiFi alarm
Secure payments

Reduced price

Buy it with

+
+
Total price: €105.79

This product: Tuya RF433 Wireless Signal Repeater with Adapter €29.90€26.90

1 review

In Stock
Tuya Wireless Dual PIR Motion Detector Solar Panel and Pet Immunity €74.90

2 reviews

In Stock
Tuya Remote Control for Wireless Alarm Panels €4.99€3.99

2 reviews

In Stock

Tuya RF433 Wireless Signal Repeater with Adapter

Reference Tuya-WSR201

Brand Tuya

Extends RF433 wireless signals

€29.90

€26.90 Save €3.00

Tax included

Read the review

Average rating: 5/5 Number of reviews: 1

Delivery in 24/48 hours

Quantity

Order it before 10 hours and 24 minutes and receive it between Monday 5 and Tuesday 6 with SDA

Description

Tuya Wide Range 433Mhz Signal Amplifier for Wireless Devices

The RF433 Wireless Signal Repeater is a device designed to amplify and improve coverage

of the RF433 signal. This type of signal is commonly used in safety devices such as

alarm sensors, wireless remote controls, home automation systems, and other operating devices

on 433 MHz radio frequencies. With its advanced technology, our repeater extends coverage

of the signal , eliminating dead zones and ensuring a rapid response to alarms. can avoid interference

during transmission and ensure reliable signal transmission.

Indispensable for Alarms

If you have an alarm system that uses RF433 sensors, the repeater can be used to extend

signal coverage. This device is designed to extend signal coverage,

ensuring reliable communication between the sensors and the alarm control unit .

The repeater can work with a group of sensors or with all of them at the same time.

Up to 100 radio sensors can be stored in its memory.

How to register sensors in the signal repeater

First, connect the power and press the sensor recording button for 3 seconds and at the same

time the sensor recording status LED will flash, activating the sensors you want to record.

Afterwards, the sensor recording LED will turn off.

How to verify that sensors have been registered

To check them it is possible to connect the registered sensors , when connected they will turn on

the transmission LED indicating that they have been connected correctly.

How to delete already registered sensors

Press and hold the Record button until the status LED flashes and goes off.

How to install 433Mhz signal amplifier for alarm detectors?

The signal amplifier works by receiving the signal from the detectors and repeating it .

In this way it is necessary to install the 433Mhz repeater in an intermediate place between the detectors and the area to which

you want to send the signal. The load capacity may vary depending on the number of walls and thickness,

and can reach up to 100-200 meters in open spaces and 40-50 meters with walls.

Note

If the sensors do not have any coding, they will not work directly with the repeater.
The transmission time is usually between 3 and 10 seconds. Longer times can damage the drive module.

Situations where a RF433 Wireless Signal Repeater can be useful

Alarm Signal Amplification : If you have an alarm system that uses RF433 sensors.
Wireless Remote Controls : If you use wireless remote controls for devices such as automatic gates , lights or garage doors, the repeater can improve the signal range.
Home Automation Systems : If you have home automation devices such as thermostats, smart lights or smart plugs that use RF433 technology.
Monitoring Systems : If you use wireless monitoring systems, such as temperature or humidity sensors to monitor specific environments.
Security Devices: In addition to alarms, other security devices such as wireless surveillance cameras, motion sensors or sirens .