Professional COB CCT LED Strip 24V 640 LED/m 5 Meters – IP20 or IP67 Version

Bring a uniform, powerful, and fully customizable light to your spaces with the Professional 24V COB CCT LED Strip, available in IP20 and IP67 variants. Thanks to the high density of 640 LEDs per meter and COB (Chip on Board) technology, the light is distributed along a continuous, even line, reducing the typical dotting effect of traditional LED strips. The Dynamic White CCT technology allows you to adjust the color temperature from 2700K to 6500K, moving from a warm, cozy white to natural light and up to a cooler, more intense white. With a stated output of 696 lumens per meter, equal to about 3480 lumens over 5 meters, CRI>90, DC24V power, and the ability to adjust brightness and color temperature via a compatible CCT controller, it’s a versatile solution for decorative, functional, and indirect lighting. The option to choose between IP20 for dry indoor environments and IP67 with silicone protection also lets you select the version best suited to your installation.

COB CCT Dynamic White 2700K–6500K

CCT (Correlated Color Temperature) technology lets you change the shade of white light to suit the environment and time of day. Using a compatible CCT controller, you can set the color temperature within the 2700K–6500K range: choose warm white to create a relaxing, welcoming atmosphere, switch to more natural tones for everyday lighting, or use a cool white when you want a brighter, more task-oriented light. A single strip thus enables different lighting scenes without having to choose a fixed color temperature at the time of purchase.

Dimmable Brightness

Beyond color temperature, you can adjust the light intensity of the strip using a compatible CCT controller. Create a soft glow for relaxing moments, or increase brightness when greater visibility is needed. Pairing the strip with a compatible Smart controller for LED strips lets you add smart control features and personalize lighting based on the controller’s capabilities.

640 LEDs per Meter for a Continuous Light Line

COB (Chip on Board) technology integrates a large number of LED chips directly onto the strip’s circuit, achieving a density of 640 LEDs per meter. The extremely short spacing between light points creates a continuous, uniform line of light, especially appreciated in visible installations and indirect lighting. The approximately 180° beam angle also helps distribute the light over a wider area than traditional LED strips.

Available in IP20 and IP67 Versions

Choose the protection rating best suited to your installation. The IP20 version, without waterproof coating, is intended for dry indoor areas and is ideal for furniture, shelves, drop ceilings, walls, LED profiles, and other applications protected from water and humidity. The IP67 variant features a protective silicone coating and is suitable for installations requiring greater protection against water and external agents. When cuts, joints, or connections are present, the overall protection rating also depends on proper waterproofing of the ends, connectors, cables, and connection points.

696 Lumens per Meter and CRI>90

With a stated output of 696 lumens per meter, equivalent to about 3480 lumens across the full 5-meter reel, the strip delivers intense illumination while maintaining the uniformity typical of COB technology. The color rendering index of CRI>90 reproduces colors more naturally and accurately, making the strip suitable for environments where light quality and correct color perception are especially important.

Flexible, Adhesive, and Cuttable Every 50 mm

The strip is designed for great installation flexibility and can easily follow profiles, furniture, shelves, drop ceilings, and many other surfaces. The 3M double-sided adhesive on the back makes it easy to mount on suitable, clean, and properly prepared surfaces. The strip can also be cut at the designated points every 50 mm, allowing you to precisely match the length to your project. The specified 10 mm width also facilitates placement in many profiles and tight spaces.

DC24V Power for Stable, Efficient Installations

The strip operates exclusively on DC24V and must be connected to a power supply sized correctly for the length used and the required power. Do not connect the strip directly to the 230V AC mains and do not power it at 12V DC. Using the correct voltage is essential to ensure proper performance and preserve the product. Power supply and controller are not included and must be purchased separately.

Compatible with CCT Controllers and Smart Solutions

To use CCT color temperature and brightness adjustment, a compatible controller is required. You can pair it with the Tuya 4-Zone Controller for Smart WiFi LED Strips, the Tuya Universal 5-in-1 Smart WiFi & Bluetooth LED Controller, the Tuya 2-Channel Controller for Smart WiFi & RF LED Strips, or the Tuya Controller for RGB+CCT LEDs Smart Matter WiFi, always selecting the controller’s CCT mode.

Connectors for Cutting, Joining, and Extending the Strip

Need to connect the strip to the power supply or join two segments after cutting? For compatible configurations, you can use the 3-Pin COB CCT LED Connector, Strip-to-Power, 10 mm or the 3-Pin COB CCT LED Connector, Strip-to-Strip, 10 mm. Before purchasing, always check that the connector is compatible with the chosen width, number of contacts, and IP20 or IP67 variant.

Main Features:

• COB technology: continuous, uniform light line with minimal visibility of individual LED points.
• High density: 640 LEDs per meter for even light output.
• Dynamic white CCT: adjustable color temperature from 2700K to 6500K via a compatible controller.
• Dimmable: adjustable light intensity via a compatible CCT controller.
• Brightness: 696 lumens per meter, about 3480 lumens over the full 5-meter length.
• CRI>90: high color fidelity.
• Beam angle: approx. 180° for wide, even light distribution.
• Length: 5-meter reel, cuttable at the designated points every 50 mm.
• Width: 10 mm.
• Power: DC24V.
• Rated power: 8W+8W per meter.
• Protection rating: available in IP20 and IP67 variants.
• Installation: 3M adhesive backing for mounting on suitable surfaces.
• Controller and power supply: not included.