Tuya Smart Carbon Monoxide Detector 433MHz Battery Operated with 85bB Siren

Protect your home with the Tuya Smart RF433 Wireless Carbon Monoxide Detector . This device

advanced is designed to detect the slightest presence of carbon monoxide (CO), ensuring maximum

safety for you and your family. Equipped with a highly sensitive electrochemical sensor and an audible alarm

from 85 dB, when the detector detects a leak, it sounds and sends a notification to the alarm control panel. The detector is

compatible with our Smart Alarm Control Units to receive instant notifications also via the App .

High sensitivity and fast response

Our carbon monoxide detector is equipped with an advanced electrochemical sensor, when the concentration

of carbon monoxide reaches 100ppm, the detector gives an alarm within 30 seconds, detects accurately

carbon monoxide levels and responds quickly to prevent fire hazards from occurring. Expand yours

security system for a comfortable home, the Detector is compatible with our wireless Alarm systems.

Simple Operation

When the concentration is 30 ppm, the screen lights up and shows the CO concentration in ppm in real time.

When the concentration is greater than or equal to 100 ppm, it enters the alarm state. The buzzer sounds approximately every 2 seconds

it makes three quick beeps, beep , beep, beep and the red light flashes once.

Improve security

Help keep your family safe with these interconnecting battery-operated smoke detectors

wirelessly with each other and other TUYA ALARMS so that they all sound when one is triggered,

creating a home safety net.

Once fire smoke danger is detected, the red LED will light up, the audible alarm will sound

at the same time and will send a notification to your Alarm Center .

Simple Installation

The carbon monoxide detector can be easily hung with just a few screws. Must be mounted ad

at least 1.5 meters from the floor and at least 1.85 meters from combustion appliances to operate properly

optimal. So you can install the detector , in the kitchen, bathroom, living room and in places with ventilation

insufficient. Powered by 3 LR03 batteries

How to add the alarm sensor to the Hub

Make sure the RF gateway is already added in the Tuya Smart or Smart Life App.

Then click "add" on the Bridge RF433 device on the app, select "alarm" and click "save".

You will understand the red LED indicator of the RF Hub starts up quickly and you hear a beep,

which means it has been entered into pairing mode.

Features and Functionality:

• Support three alarms: independent sound and light flash alarm, 433 wireless transmission network alarm.
• Patented full snap-in structure , simple installation, no need for debugging and wiring.
• 360 degrees Gas detection and alarm, no dead angle, reliable.
• Built-in high sensitivity detection technology, reliable and safe.
• Built-in 85dB sound and light alarm reminder, effectively prompting people to evacuate.
• Microcontroller Ultra low power + photoelectric principle technology, long standby battery life.
• Adopts patented high-performance photoelectric bidirectional dispersion technology of two receivers and one transmission, stable, reliable and accurate.
• Low Voltage Alarm : When the battery voltage is lower than 6.8V, a warning sound is released to remind users to change the battery.
• Rotating removable top cover design for easy cleaning and battery replacement.