Tuya Methane Gas Sensor (CH4) Smart ZigBee with Sound Warning

Do you want to protect your home from gas leaks? In that case, we have a Zigbee smart gas sensor

ready for you. You will be informed immediately of the increase in gas concentration,

thanks to which you will have time to react appropriately.

For its ideal connection to your smart home, it requires a Zigbee Hub (ZigBee 3.0 protocol).

The Intelligent Flammable and Explosive Gas Detector is a high performance detector with a

Advanced low-energy gas sensor with automatic system reset, designed for monitoring

continuous air flow for the early detection and alarm of flammable and explosive gases in the home environment.

The gas detector is ideal for detecting gas leaks from all domestic gas appliances and gas boilers.

Detects all flammable gases commonly found in homes. The device is powered by the 230V mains.

Create Scenes for your Safety

Possibility to set the action after the sensor alarm and to connect it with other devices, for example:

When the gas concentration is exceeded, the output relay closes and signals the siren and disconnects the

main gas connection to the house, apartment, etc. via a connected Tuya Manipulator .

Built-in alarm siren

The loud siren (> 75 dB) built around the sensor as a sign of a dangerous situation.

When the gas detector is activated, it will alarm with the built-in siren.

Everything under control Through the App

The user will be informed of the gas leak via a smart application directly on the mobile phone.

The Tuyasmart or Smartlife smart mobile application allows you to control and

manage your home from anywhere in the world only with the help of the Internet and your mobile phone.

In addition to the usual functions, this device excels with completely new functions :

Test function : The device is equipped with a test function, which serves to artificially simulate the presence of

gas and allows the operation of internal circuits to be checked through an automatic efficiency monitoring system.

Where to install the detector

We install flammable and explosive gas detectors in rooms with a potential gas leak

(gas boiler rooms, kitchens, rooms with wavkami, karma, direct heaters, thermometers, etc.).

The basic criterion for the correct positioning of the detector is the identification of the gas, that is, if we will detect gas

light (rising to the ceiling) or heavy gas (falling to the ground).

We will choose the installation location according to this criterion.

We always install the gas detector on the wall, depending on the type of gas detected or under the ceiling (approx. 15-30 cm)

o above the floor (approx. 15-30 cm), at a distance of at least 1.2 m from the fuel combustion device

to minimize false alarms, which can occur during a brief gas leak, such as during ignition

of a boiler or gas stove and at a distance of about 60 cm from the corners, i.e. where two walls converge.

Functions and Features :

• Gas leak detection (CH4)
• Loud alarm 75 dB
• A ZIGBEE HUB must be purchased for gas sensor operation
• Free mobile application for iOS and Android devices
• When you detect gas, you receive a notification directly on your mobile using the application
• Control from anywhere the internet is available
• It has alarm, automation and intelligent scenarios
• No cost of use
• Modern design