Tuya Smart WiFi Doorbell with Wireless Alarm Function Consisting of Receiver and Transmitter

The Smart Doorbell can work in doorbell or alarm mode.

This multipurpose device consists of a main-doorbell unit (receiver), a wireless doorbell (transmitter).

The doorbell is powered directly from the 230V socket and has an integrated siren with a volume of about 85 dB.

All the configuration and control of the SMART doorbell is very simple, everything is set up and controllable

via an application on a mobile phone with an iOS or Android operating system.

Tuya Smart or Smart Life smart mobile application allows you to control and manage your home

from anywhere in the world only with the help of the Internet and your mobile phone.

No control unit or "gateway" is needed.

Each device has all the necessary components to communicate with your mobile phone via the Internet (cloud).

The Smart Doorbell also contains a wireless part for receiving signals from wireless detectors ,

then the user has the opportunity to expand this system up to 100 other Tuya Smart wireless detectors

(such as PIR detectors, door sensors, remote controls-remote controls, etc.).

The transmission of the radio signal occurs at a frequency of 433 MHz.

No drawing or complicated setup is required to connect the doorbell detectors to the receiver.

The detectors compatible with this Smart Doorbell are wireless and battery powered CR2032 .

Also compatible with Alexa and Google home , you can control the device by voice command,

make your life smarter .

Adding more detectors is a matter of seconds.

The wireless detectors have a range of up to 50m in open spaces.

All you have to do is insert the batteries and place the detectors in the room.

The SMART doorbell can work in doorbell or alarm mode.

Switching to bell mode changes the signal to the harmonic tone of the bell.

Plus, you can choose from 58 different ringtones.

In alarm mode, the SMART doorbell responds to the opening of a door or window or

when motion is detected by a loud beep.

When an alarm is triggered, the electric siren inside the SMART doorbell (receiver)

will sound and the identification LED on the receiver will start flashing.

This will alert you and your surroundings of a window or door opening or a detection

of movement in front of the PIR sensor. So you can sleep without being robbed.

At the same time, the SMART doorbell allows for easy activation and deactivation using a remote control or application.

The SMART doorbell is designed not only for audio and visual notification of incoming visitors,

but also for the basic security of your apartment, house, cottage or garage, to increase

security and to detect the entry of an unauthorized person.

At the same time, it is a great help in places with poor view of the front door,

or when you frequently exit the entrance room into shops, offices and garages up

at a distance of 50 meters - will also serve as a sign entry call.

For outdoor use, a wireless doorbell must be installed directly underneath

the shading roof and thus avoid direct contact with rain, snow, etc.