Tuya Radio channel motion sensor for burglar alarm with animal protection

Designed to detect intrusion into a closed guarded room and generate an

notification of this event by transmitting the status via radio channel to the control panel .

The IR sensor is designed for installation indoors.

When installing, pay attention to whether there are any objects

that block it in the path (curtains, wardrobes, indoor plants, etc.).

There should be no windows, air conditioners, radiators and other devices of

heating in the detector 's field of view.

It differs from its counterparts in that the built-in processor allows you to ignore

the movement of small infrared dots. (animals up to 20 kg, sunlight, reflections).

The motion sensor

Responds to the presence and movement of infrared radiation.

Every person, animal emits infrared radiation from the body. The sensor "sees" this

point, "sees" its movement and gives an alarm command to the control panel.

Sending an alarm signal via radio

No need to pull strings. The entire wireless sensor installation process takes 3-5 minutes.

Signal transmission frequency to the control panel is 433/315 MHz

This is the main frequency used by wireless radio sensors .

In case you need to further augment your security system with additional sensors,

they will most likely be compatible with the equipment installed.

The detection range is up to 12 meters and depends on the area of the IR spot

The larger the spot, the greater the detection range and, consequently,

the smaller the dot, the shorter the sensing distance.

The Animal Protection function

Allows you to ignore the movement of small animals (small infrared dots).

The sensor, thanks to an additional processor, reacts not only to the presence and

to the movement of the IR spot, but also analyzes its area .

Maximum detection angle

In case you place the sensor in the corner of the room, it will "close" the entire controlled room

with a range of up to 12 meters. Approximately: one sensor can control 20-25sqm.

The transmission distance reaches 100-150 meters

The wireless sensor can be placed 100-150 meters from the control panel.

All walls shorten the distance, but approximately you can be guided that the

sensor will "punch" 2-3 concrete walls with a distance of 20-30 meters.

Battery Powered

It is powered by a conventional CR123 BATTERY

The term of operation reaches 1 year (depending on the quality of the battery

used, the temperature regime and the number of operations during the day).

The sensor can be fine-tuned to reduce power consumption by limiting the number of operations.

The presence of a power switch

It allows, if necessary, to switch off the sensor with a manual switch

and thus save battery power.

Temperature range -10..+50

The sensor can also be used at lower temperatures, down to -10, while the battery life will be reduced.

Simply deadly

The sensitivity and effectiveness of these sensors are exceptional ! This sensor, due to its peculiarities

features such as excellent sensitivity and false alarm immunity, based on special optical lens,

it is the ideal complement to our alarm system.

The product is compatible with all our alarm control units .

Characteristics

• Low consumption thanks to the reduced design. High capacity lithium batteries
• Includes multi-grade processing design to analyze images while reducing false alarms.
• Digital analysis to avoid pet detections
• Wireless connection.
• Up to 2 different detection levels to suit different environments
• Includes temperature compensation technology
• Avoid electromagnetic interference
• It allows you to differentiate whether it is a human being or a small animal to avoid false alarms.