- Reduced price
- Smart Home
- Smart Plug
- Camera WiFi
- Smart Switch
- ZigBee devices
- Sensors and Detectors
- Wi-Fi Switches
- Remote Hub
- Anti-theft and Alarm
- Video door phones and doorbells
- Smart locks
- Swimming pools
- Smart thermostats
- Smart Electronic Devices
- Home Network
Tuya 4 Pin RGB LED Strip 5 meters
12V waterproof RGB LED strip with a power of 36W
Tuya 12V waterproof 4 Pin RGB LED Strip with a power of 36W 5 meters
The 12V waterproof RGB LED strip with a power of 36W is equipped with 5050 RGB diodes in the amount of 30 led / m.
This RGB strip has a high light output and increased protection against moisture (IP65),
which guarantees wide possibilities of use, especially in the most demanding environments.
RGB tapes are special colored tapes that can change the color of the light and are therefore perfectly suitable
as universal lighting for work, reading, parties or to promote well-being.
To fully control them, you need to use our TUYA smart LED controller ,
thanks to which it is possible to set colors, intensity and scenes to create the right atmosphere with the possibility of
remote control of the LED strip via a mobile application or voice assistant .
With our smart LED controller , you can turn the LED strip into one
smart LED strip controlled remotely by a smart app.
Features and Functions:
- RGB 5050 branded chip with guaranteed performance and durability
- power 36W, 30led / m waterproof design
- IP65 protection Length 5 meters
- Quick and easy installation
- in plasterboard ceilings and niches
- great for lighting up beds, furniture, TV cabinets, etc.
- lighting of exhibition stands
- wellness, saunas and pool areas
- for bathrooms and outdoor spaces with higher air humidity
Connection diagram of RGB LED strip:
Connect the RGB LED controller between the source and the RGB LED strip. With this connection it is necessary to comply
the polarity (+ -) from the source to the LED controller and the polarity of the 4 contacts (+, R, G, B) from the controller to the RGB LED strip.
The +, R, G, B markings are located on both the RGB LED strip and the controller, and you need to follow the same connection.
LED strips should not be installed in direct sunlight. Even when the LED strip is off,
it is then affected by a high temperature, which considerably reduces the life of the LEDs and can cause stresses in the material,
thus damaging the connections and causing the lighting of the individual modules to fail.
|Tuya Smart Wifi Led Strip 4 pin
|Led Strip Connector
|Number of balls
|30 led / m
|Degree of waterproofness of the LED strip
|IEEE 802.11 b / n / g 2.4G Hz
|Voice control support
|Amazon Alexa / Google Assistant
|-10 ° C to + 60 ° C
|5% - 95% non-condensing
| 150X150X50 mm
- Voice Control
- Amazon Alexa, Google Home and Siri
- Mobile application
- Tuya Smart or Smart Life
- Communication Protocol
Inteligentne łańcuchy świetlne WiFi i Bluetooth
Pasek świetlny LED o dużej gęstości