Tuya Smart WiFi Methane Gas Detector with Siren

Smart WiFi detector of natural gas, methane (CH4) with sound warning

The Intelligent Flammable and Explosive Gas Detector is a high performance detector with a gas sensor

advanced low energy with automatic system reset, designed for continuous air monitoring

for the early detection and alarm of flammable and explosive gases in the home environment.

When the gas concentration is exceeded, the output relay closes and signals the siren and disconnects

the main gas connection to the house, apartment, etc. through TUYA MANIPULATOR .

Built-in alarm siren

The loud siren (> 75 dB) built around the sensor as a sign of a dangerous situation.

The user will be informed of the gas leak via a smart application directly on the mobile phone.

Everything under control Through the App

The Tuyasmart or Smartlife smart mobile application allows you to control and manage your home from anywhere

part of the world only with the help of the internet and your mobile phone. No control unit or "gateway" is needed.

Each device has all the necessary components to communicate with your mobile phone via the Internet (cloud).

The WiFi detector is ideal for detecting gas leaks from all domestic gas appliances and gas boilers.

Detects all flammable gases commonly found in homes.

The device is powered by the 230V mains.

In addition to the usual functions, this device excels with completely new functions:

Application test function : The device is equipped with a test function, which allows you to artificially simulate the

presence of gas and allows the operation of internal circuits to be checked through an automatic efficiency monitoring system.

Where to install the detector

We install flammable and explosive gas detectors in rooms with a potential gas leak (gas boiler rooms, kitchens,

rooms with wavkami, karma, direct heaters, thermometers, etc.). The basic criterion for correct positioning

of the detector is the identification of the gas, that is, if we will detect light gas (rising to the ceiling) or heavy gas (falling to the ground).

We will choose the installation location according to this criterion.

We always install the gas detector on the wall, depending on the type of gas detected either under the ceiling (approx. 15-30 cm) or above

the floor (approx. 15-30 cm), at a distance of at least 1.2 m from the fuel combustion device to reduce

false alarms, which can occur during a brief gas leak, for example when switching on a gas, to a minimum

boiler or gas stove and at a distance of about 60 cm from the corners, i.e. where two walls converge.