Tuya RF433 Wireless Anti-Flooding Detector for Alarm Systems

The wireless anti-flood sensor is designed to detect water leaks in a room with formation

and the transmission of a signal relating to this event via a 433 MHz radio channel to the alarm control panel .

Designed with maximum precision and reliability , this revolutionary sensor is your silent guardian

against potential water disasters. The flood sensor works together with our alarm systems,

who receive the detector alert if water is detected. The alarm center , depending on the configuration chosen,

It will alert you immediately when a small water leak is detected. Particularly suitable for

check rooms where there may be water leaks, such as basements, cellars, basements and laundry rooms.

It is recommended to connect this type of sensor to the alarm control unit in " 24 hour monitoring " mode.

This means that even when the security is deactivated, the signal received by this sensor will put the

system in alarm mode , thus ensuring 24-hour monitoring, 365 days a year.

Maximum Precision

Thanks to its advanced design, the flood sensor detects even the smallest water infiltrations,

instantly transmitting a radio signal to the control panel of your alarm system .

With an RF433 frequency, it guarantees reliable communication in every situation.

Where to install the flood alarm sensor

Since it is a wireless sensor, you can place the detector wirelessly in the exact position you need.

It is possible to install the detector near kitchens, bathrooms, pipes and in general near flooded areas

where the flood detector can be activated even by a small water leak.

Simple Operation

With the Tuya Water Leak Detector , your protection is simple and straightforward. The heart of this device is a

sensitive plate equipped with an open electrical circuit and open contacts. When water comes into contact with it

plate, the contacts close instantly, activating the electrical circuit. This closing signal comes

immediately transmitted to the central unit of your wireless alarm system which alerts you to the danger.

It installs quickly

With its compact dimensions (80 x 30 x 13 mm) and flexibility in installation, this sensor can be positioned

everywhere, from floors to attics , effortlessly and without the need for specialist knowledge. Fixing can take place

via double-sided tape or mounting screws, giving you freedom of choice in arrangement. Powered by CR2032 battery .

Optimal positioning

Install the sensor on the wall at least 50cm above floor level and the water contact sensor on the

floor, facing downwards, for optimal leak detection .

It works on RF433 frequency

The Water Leak Detector operates on an RF433 frequency, ensuring uninterrupted and reliable communication with

your alarm center. Thanks to this advanced technology, the signal can communicate up to 100 meters in open space.

Wide compatibility

Our RF433 Wireless Water Leak Detector offers extensive compatibility and requires a WiFi or GSM Alarm Kit such as:

WG103T - G30 - H502 - pg109t - WG107T - PG500 - 30A - H6 - G60B

Features and Functionality:

• Easy to set up with sensing element and contact plate.
• Dimensions: 80 x 30 x 13 mm with 95 cm long probe wire .
• Sending an alarm signal via radio channel.
• Totally wireless and battery powered.
• No wires , easy installation.
• Low battery indicator.
• Works with the Tuya Smart alarm system .