- New
Expert4House – Smart Home, Smarter Living
608 LEDs per Meter DC24V 2700-6500K 5 Meters CCT COB LED Strip
€35.90
Tax included
No review at the moment
- Tunable white from 2700 to 6500 K: warm-white and cool-white LEDs on the same strip: with a CCT controller you can shift from warm white to cool white and every tone in between.
- COB with 608 LEDs per meter: LEDs are so close that the light appears as a continuous line, with no visible dots: 3040 LEDs on the 5 m reel.
- Up to 840 lumens per meter: 640 lm/m in warm white at 2700 K, 840 lm/m in cool white at 6500 K, and 720 lm/m with both whites on together.
- Color rendering Ra > 90: colors of furniture, walls, and objects remain natural under the light: useful in kitchens, shops, and display areas.
- 24 V power: draws 8 W per meter, i.e. 40 W for the whole reel. The 24 V power supply is sold separately: choose one with a bit of headroom.
- Requires a two-channel CCT controller: not included. The controller adjusts color temperature and brightness, dimmable from 0 to 100%. App and voice control depend on the controller.
- Reel-to-reel circuit: the PCB is a single piece for the full 5 meters, without the half-meter solder joints typical of standard strips, which are a common weak point.
- Cut every 26.3 mm: shorten the strip at the marked cut points: the section still connected to power will keep working.
- 10 mm PCB, 1.8 mm thick: flexible 2 oz double-layer circuit, designed to reduce voltage drop and dissipate heat better.
- Three wires and 150 mm lead: common positive at 24 V and the two channels for warm and cool white. For splices and connections, use the 10 mm 3-pin COB CCT connectors.
- 3M adhesive on the back: clean the surface, remove the liner, and press. For better heat dissipation and to protect the strip, an aluminum profile is recommended.
- IP20 or IP67 version: IP20 is for dry indoor areas; IP67, silicone-coated, is suitable for bathrooms, under canopies, and humid environments.
Secure payments: cards, PayPal, bank transfer, and installments
Delivery within 48 hours: Free shipping on orders over €150 across Europe
Easy 14-day returns: follow the steps to get your refund
24V CCT COB LED strip: warm to cold white with continuous light and Ra > 90
The COB CCT LED strip gives you a white that changes: from warm white 2700K , suitable for the evening, to cool white 6500K , suitable for when working or cooking. The same strip contains warm and cool white LEDs, and the controller mixes them. With 608 COB LEDs per meter, the light comes out as a continuous line, without dots. It produces up to 840 lumens per meter at 6500K, with a color rendering index greater than 90. It works at 24V , consumes 8W per meter, and can be cut every 26.3mm. The reel is 5 meters long, in IP20 or IP67 version. The CCT controller and 24V power supply are purchased separately.
You need a two-channel CCT controller to adjust the white
This strip has three wires: the common positive 24 V and the two channels of warm white and cool white. To control it, you need a two-channel CCT controller , which doses the current on the two whites and thus changes the light temperature and brightness. The controller is not included. With the Tuya 2-channel WiFi and RF controller from our catalog, you can control it from the app , with the remote control, and with voice assistants compatible with the controller. The image shows exactly this: select the color tone on your smartphone and the strip goes from 2700 to 6500 K. The strip itself does not connect to Wi-Fi.
From 2700 to 6500 K and brightness from 0 to 100% for each environment
With the right controller, you can choose the right shade for every moment. Warm white (2700K) makes the living room cozy in the evening; natural white (4000K) is perfect for kitchens and workspaces; cool white (6500K) provides a bright light in bathrooms, offices, and display cases. The brightness can be adjusted from 0 to 100% , so you can use it as a background light or fully illuminate a work surface. The entire coil draws 40W: with a suitably powerful 24V power supply , you can power it without any problems.
Uniform COB light: 608 LEDs per meter without the dotted effect
In traditional LED strips, with spaced SMD diodes, individual light points are visible, especially on glossy surfaces. COB technology places the LEDs so close together that the light comes out as a uniform line , even without a diffuser profile. With 608 LEDs per meter, the 5-meter reel contains 3040. The image compares our strip with a standard strip: fuller, more even light, and 3M double-sided tape instead of a generic adhesive. If you need an even higher density, there is the COB CCT strip with 640 LEDs per meter .
Shops, bars, galleries, and showrooms: where to use the CCT strip
Dimmable white works where light needs to adapt to its intended use. In bars and restaurants, it switches from cool daylight to warm evening light; in shops and showrooms, it highlights products with a color rendering index above 90; in galleries and exhibition spaces, it illuminates artwork and walls without distorting colors. In the home, it creates coves in the ceiling, illuminates the kitchen counter under cabinets, and follows stairs, shelves, and closets. For bathrooms and humid environments, choose the IP67 version; the IP20 version is for dry interiors.
Installation with 3M double-sided tape and cutting every 26.3 mm, at low voltage
Installation is simple. There's 3M double-sided tape on the back: clean the surface, remove the film, and press. The strip is cut every 26.3 mm along the printed markings, and the remaining section continues to function. It operates at 24 V, a low voltage that makes it safe to handle during installation. For solderless joints and connections, on the IP20 version, use the 10 mm 3-pin COB CCT connector . For better heat dissipation and a perfectly straight line, it's best to mount it in an aluminum profile.
Solderless reel-to-reel circuitry that's flexible at every turn
R2R stands for reel-to-reel : the printed circuit board is a single piece for all 5 meters, eliminating the soldering every half meter of traditional strips, which often result in faulty contacts and dark areas. The flexible PCB is double-layered and 2 oz , designed to reduce voltage drop along the reel and better disperse heat. The strip is 10 mm wide and 1.8 mm thick: it bends to follow curves, corners, and profiles. The brightness remains adjustable from 0 to 100 % e the light is soft, without dark areas.
Technical data sheet: lumens, consumption, dimensions and IP20 and IP67 versions
Frequently Asked Questions
What controller do you need?
A 24V dual-channel CCT controller that adjusts warm and cool white. The controller is not included: our catalog includes the 2-channel WiFi and RF Tuya controller.
Does it work with an SPI controller or an RGB controller?
No. It is a traditional CCT strip, not addressable: the entire strip changes tone at the same time and serves the two white channels.
How many lumens does it make?
640 lumens per meter in warm white at 2700K, 840 in cool white at 6500K and 720 with the two whites on together.
What power supply do you need?
One at 24 V. The strip consumes 8 W per meter, so 40 W for the 5-meter reel: choose a power supply with some headroom.
Where can it be cut?
Every 26.3 mm, on the printed marks. The part that remains connected to the power supply continues to function.
Can you see the LED dots?
No. It is a COB strip with 608 LEDs per meter: the light comes out as a continuous line even without a diffuser profile.
Can it be used in the bathroom or outside?
The IP67 version is silicone-coated. The IP20 version is only suitable for dry interiors.
Is it controlled with Alexa or Google?
Not directly. The strip doesn't have Wi-Fi: the app and voice commands depend on the controller you connect.
What does R2R mean?
Reel-to-reel: the circuit is a single piece for all 5 meters, without the soldering every half meter of traditional strips.
Tuya-36082-R2R-CCT-IP20
Data sheet
- Colors
- CCT White Variable
- Voice Control
- None
- Power
- 40W
- Dimensions
- 10x1.8x5000mm
- input voltage
- 24V DC
- Protection Rating
- IP20
IP67 - Length
- 5 meters
10mm - luminous flux
- 720LM per Meter
- Color Temperature
- 2700-6500K
- LED type
- COB
- LED per Meter
- 608 LEDs/m
- Color rendering index
- Ra 90+
- Dimming range
- 0-100%
- Cutting length
- 26.3mm
- LED Chip Type
- COB
- Works with
- No app (accessory)
- Hub required
- None (Wi-Fi / standalone)
- Ideal for
- Lights & LED
- Home Assistant integration
- Not integrable
Specific References
- UPC
- 893609052835
- EAN13
- 8936090528358
- MPN
- Tuya 36082 R2R CCT IP20
Click on a thumbnail to load the video
You might also like
Customers who bought this product also bought:
- Tunable white from 2700 to 6500 K: warm-white and cool-white LEDs on the same strip: with a CCT controller you can shift from warm white to cool white and every tone in between.
- COB with 608 LEDs per meter: LEDs are so close that the light appears as a continuous line, with no visible dots: 3040 LEDs on the 5 m reel.
- Up to 840 lumens per meter: 640 lm/m in warm white at 2700 K, 840 lm/m in cool white at 6500 K, and 720 lm/m with both whites on together.
- Color rendering Ra > 90: colors of furniture, walls, and objects remain natural under the light: useful in kitchens, shops, and display areas.
- 24 V power: draws 8 W per meter, i.e. 40 W for the whole reel. The 24 V power supply is sold separately: choose one with a bit of headroom.
- Requires a two-channel CCT controller: not included. The controller adjusts color temperature and brightness, dimmable from 0 to 100%. App and voice control depend on the controller.
- Reel-to-reel circuit: the PCB is a single piece for the full 5 meters, without the half-meter solder joints typical of standard strips, which are a common weak point.
- Cut every 26.3 mm: shorten the strip at the marked cut points: the section still connected to power will keep working.
- 10 mm PCB, 1.8 mm thick: flexible 2 oz double-layer circuit, designed to reduce voltage drop and dissipate heat better.
- Three wires and 150 mm lead: common positive at 24 V and the two channels for warm and cool white. For splices and connections, use the 10 mm 3-pin COB CCT connectors.
- 3M adhesive on the back: clean the surface, remove the liner, and press. For better heat dissipation and to protect the strip, an aluminum profile is recommended.
- IP20 or IP67 version: IP20 is for dry indoor areas; IP67, silicone-coated, is suitable for bathrooms, under canopies, and humid environments.
608 LEDs per Meter DC24V 2700-6500K 5 Meters CCT COB LED Strip
€35.90
Tax included
No review at the moment