Expert4House – Smart Home, Smarter Living
No review at the moment
Secure payments: cards, PayPal, bank transfer, and installments
Delivery within 48 hours: Free shipping on orders over €150 across Europe
Easy 14-day returns: follow the steps to get your refund
The 2-Pin Female DC Jack Connector for Single-Color COB and SMD LED Strips is the simplest and fastest solution for powering your strips without soldering. Available in various widths (8 mm, 10 mm, and 12 mm) and with different cable lengths, it adapts perfectly to all major 5V, 12V, and 24V single-color LED strips in our store, including continuous-light COB strips and classic SMD strips on aluminum profiles. The quick-fit connector allows you to connect the strip directly to power supplies, dimmers, and controllers with a standard 5.5x2.1 mm DC socket, ensuring stable and secure electrical contact even in professional installations. Simply cut the strip at the indicated point, insert it into the connector, and tighten the plate with pliers to obtain a clean, reliable, and easily inspectable connection in just a few seconds: ideal for kitchens, walk-in closets, ceiling lights, display cases, and any linear lighting project requiring quick and tidy connections.
At Expert4house, you'll find a wide range of quick-release solderless connectors for COB and SMD LED strips : T-connectors, L-connectors, linear connectors, strip-to-DC connectors, and many other solutions designed to simplify every joint and installation. These accessories allow you to create bends, crossovers, extensions, and power supply connections in seconds, creating clean, safe, and professional installations even without soldering experience.
Simply cut the LED strip at the indicated location, insert the PCB into the transparent connector, and tighten the pins with simple pliers. The perforated contacts penetrate the copper without the need for solder or exposed wire, ensuring a secure and stable electrical connection immediately, ready to be connected to the power supply or other connectors in the line.
It is compatible with 2-pin (positive/negative) single-color COB and SMD LED strips powered by 5V, 12V, or 24V DC. Simply choose the correct width (8mm, 10mm, or 12mm) based on the width of your strip's PCB.
No, no soldering is required. Simply cut the strip at the indicated point, insert the two copper contacts into the connector, and tighten the internal sheet with pliers: in just a few seconds, you have a ready-to-use connection.
You'll need a DC power supply with a standard 5.5 x 2.1 mm male jack, matching the voltage rating of the strip (5V, 12V, or 24V). The connector only acts as an adapter/junction; it doesn't change the voltage or current.
The connector is suitable for most residential and decorative installations with single-color strips. For very long lines or high-power strips, we recommend dividing the system into multiple power points to avoid voltage drops.
This model is not waterproof: it is suitable for indoor use or in protected environments. If you need to install it outdoors or in very humid areas, we recommend protecting it in suitable conduits, boxes, or profiles.
Use a ruler to measure the width of your LED strip (the white part of the PCB, not the silicone). For example, if your strip is 8 mm wide, you'll need to choose the 8 mm connector. If you're unsure, you can send us a photo of the strip with the measurement and we'll help you select the correct model.
Standard deliveries to Italy generally take 24-48 hours from the time the package leaves the warehouse.
Orders confirmed by 3:30 PM on weekdays (Monday-Friday) are processed and shipped the same day.
Orders placed after 3:30 PM or on weekends or public holidays will be processed on the next working day.
Yes, we ship internationally to the European Union and several non-EU countries via couriers such as UPS Standard and DHL Express.
For the EU, with UPS Standard the average times are 2-3 working days .
With DHL Express, usually 1-2 business days .
Data sheet
Specific References
No review at the moment
