Sonoff Orb Socket Smart Wall Socket with WiFi

The EU smart wall socket is a European-standard wall socket, fixed and installed in the wall to power appliances. It adds app control, energy monitoring, and automation, allowing you to manage appliances remotely and improve energy efficiency via Wi-Fi.

European homes primarily use Schuko (Type F) and Type E wall sockets. This EU smart wall socket is available in both types, ensuring compatibility with common European electrical standards.

This EU smart wall plug works with Apple Home, Amazon Alexa, Google Home, SmartThings, and Home Assistant. With Matter compatibility, you can control the smart wall plug across multiple systems and brands—without being tied to a single platform.

SONOFF smart wall sockets support a maximum load of up to 16A at 250V, making them suitable for most everyday appliances. To ensure safe operation, please refer to the specifications of your specific model and confirm compatibility with the devices you intend to use.

Yes. SONOFF EU smart wall sockets are built to European standards and designed with multiple safety protections. They feature Overload Protection that automatically cuts off power if the current, voltage, or power exceeds safe limits, helping prevent overheating and electrical hazards. Additionally, Overcharge Protection automatically cuts off power once the device is fully charged, reducing battery wear and improving daily safety and energy efficiency.

Yes. The SONOFF flush-mounted smart socket can be controlled remotely using a Matter-compatible smart home app or platform (such as Alexa, Google Home, Apple Home, Home Assistant, SmartThings). This allows you to turn devices on or off from anywhere, set schedules or timers, and integrate it with other smart home devices for automation.

Absolutely. The SONOFF smart wall socket for the EU works with leading voice assistants like Alexa, Apple Home, and Google Home via Matter integration, so you can control connected devices with simple voice commands.

The SONOFF EU Smart Wall Socket is designed for indoor use and fits standard European Type E and Type F back boxes. It is ideal for living rooms, bedrooms, kitchens, offices, and any room where you want intelligent control and energy monitoring for connected appliances.

You can use this smart plug with most resistive loads (such as lamps, TVs, routers, chargers) or other small, low-power inductive loads (such as fans). It supports a maximum load of up to 16A (4000W), but always check the power rating of your appliance before use.

This smart European wall socket requires a live and neutral wire for operation, and a ground wire is required for proper safety. Since the smart socket supports a maximum operating current of 16A, the live, neutral, and ground wires connected to the socket must each have a minimum cross-section of 2.5mm². Using wiring with the correct rating helps ensure safe operation and prevents overheating.

To safely and correctly install the smart wall socket, follow these steps :

Prepare your device: Use a screwdriver to pry the switch cover up from the notches on the back.

Safety First: Make sure the power is off before starting any electrical connections.

Connections: Locate the wires (checking for the presence of the neutral wire) and connect them according to the wiring diagram, making sure all screws are tightened securely.

Positioning: Insert the device into the flush-mounted box, making sure that the raised corner is aligned with the power symbol.

Pairing: Turn the power back on and scan the QR code via your app. If the indicator doesn't flash correctly, press and hold the button for 5 seconds to enter pairing mode.

This is usually caused by a misalignment between the panel button and the power module during installation. Please follow the steps below to resolve the issue:

Power off and disassembly: First, unplug the power from the outlet, then remove the plate from the wall.

Check alignment: Use the eWeLink app to scan the QR code on the device body and view the correct installation orientation of the socket cover.

Reassemble: Reinstall and secure the plate in the correct orientation.

Yes, but just to be safe:

Make sure that the total power consumption of all connected devices does not exceed the capacity of the socket (16A/4000W).

Use a certified power strip with overload protection.

Avoid running multiple high-energy appliances simultaneously for extended periods.

Standard deliveries to Italy generally take 24-48 hours from the time the package leaves the warehouse.

Orders confirmed by 3:30 PM on weekdays (Monday-Friday) are processed and shipped the same day.
Orders placed after 3:30 PM or on weekends or public holidays will be processed on the next working day.

Yes, we ship internationally to the European Union and several non-EU countries via couriers such as UPS Standard and DHL Express.

• For the EU, with UPS Standard the average times are 2-3 working days .

• With DHL Express, usually 1-2 business days .