Tuya DC12V Wired PIR Motion Sensor for Security Alarms

Optimize the security of your property with the Tuya wired PIR motion sensor, a highly reliable and reliable device

precise designed to detect intrusions inside closed rooms and protect them effectively. Thanks to its technology

advanced infrared , the sensor detects movements up to 12 meters away, ensuring wide area coverage

monitored. When it detects an intruder in its field of view, the sensor will emit a signal through the cable to the control panel

alarm to alert you to the detection. The configuration of this motion sensor is ideal to be installed in

indoor environments , such as offices, homes or any other space that requires continuous surveillance.

To maximize the effectiveness of the sensor, it is essential to install it in strategic positions where there are none

obstacles that may block your view, such as thick curtains or tall furniture.

High Precision Detection

Tuya wired PIR motion sensor uses advanced infrared sensing technology to monitor

the internal spaces effectively. Capable of covering a distance of up to 12 meters with a wide detection angle of

110 degrees , the sensor guarantees complete coverage and without dead corners, ideal for closed protected rooms.

Sensitivity Configuration

This sensor allows sensitivity adjustment to avoid false alarms, making it ideal for environments

domestic. Sensitivity can be adjusted through internal jumpers , allowing users to

customize the sensor response based on the surrounding environment.

Easy and Versatile Installation

Supplied with a wall mount, the sensor can be easily attached and oriented to maximize the detection area.

The adjustable bracket allows users to direct the sensor to specific areas requiring surveillance while

the recommended installation between 1.70 and 2.20 meters from the floor optimizes the detection field.

Integrated Alarm and LED Indicators

Equipped with LED indicators, the sensor visually shows the operating status. A red LED flashes in the presence of

detection, transmitting a signal to the alarm host when the system is armed. This allows for identification

immediate response to an intrusion event and facilitates monitoring of the sensor status.

Flexible Power Supply

The IR101 sensor offers wired connections for 12V, GND , alarm , and Tamper . These connections ensure a

stable and reliable signal transmission between the sensor and the alarm panel The sensor offers versatility in options

connection, allowing users to choose between Normally Closed (NC) or Normally Open (NO) contact.

This feature is crucial to adapt to different security systems and alarm requirements.

Compatible with Our Smart Alarm Kits:

Tuya-PG500 - Tuya 30A-TY-4G - Tuya G30-4G - Tuya WG107T-4G - Tuya PG109T -4G

How to Install an IR101 Alarm Detector?

Height and Positioning:

• Recommended height: Between 1.70 and 2.20 meters.
• Installation angle: 70-80º from the ground to cover a large area.

Environment and Positioning:

• Avoid installation near sources of heat or air currents.
• Do not place directly under sunlight or near high voltage lines.
• Install on a solid surface to prevent vibration.

Assembly :

• Use the bracket provided to attach the detector to the wall.
• Secure the detector with the included screws and anchors.

Internal Configuration:

• Open the detector to access jumpers for sensitivity and wired connections.
• Connect the power and signal cables according to the instructions to ensure proper operation.